Limiting the Lead Dust Generated in the Lead Contaminated Worksite

Limiting the amount of dust generated on a daily basis is critical to maintaining a healthy worksite as well as facilitating a fast clean-up when the project finalizes. These quick tips performed on a daily basis add only a few minutes to each workday, but save hours of clean-up on the backend.

When working on surfaces containing lead, mist them with water prior to sanding, scraping, cutting or drilling. This simple trick will cut down lead dust dramtically.

Prior to pulling apart components, score the joint with a utility knife and pry apart rather than pounding or breaking. This will minimize the amount of lead paint chips generated at the site.

When dealing with windows sills and other nonporous surfaces, you can use chemical strippers without methylene chloride to remove the contaminated paint without generating dust.

Wipe down the work space regularly with wet wipes and disposable swiffer wetjet pads to reduce the dust buildup. Place all debris in a heavy duty trash bag daily. Trash bags should be sealed with duct tape and removed to a secure dumpster or storage facility.

HEPA vacuum the area on a daily basis, and clean all tools before removing them from the worksite.

Equipment You will Need

•Water Spray Bottle
•Utility Knife
•Dry/wet Sandpaper
•Chemical strippers without Methylene Chloride
•Power tools with dust muzzle attachments for HEPA vacuum cleaners
•HEPA vacuum cleaner
•Low-temperature heat gun
•Dry Wipes, Wet Wipes and Swiffer Wipes
•Heavy-duty plastic bags
•Duct Tape to seal the trash bags

Caution: Certain procedures are prohibited by the RRP Rules in a lead safe work space. Use of power tools to sand, scrape, grind, plane or drill without a HEPA vacuum shroud attachment is strictly prohibited. Compressed air or sand blasters may not be used to remove lead from any of the surfaces. As with all renovation activities common sense should prevail - if inhaling lead dust is highly dangerous to your health, heating it to a vapor will be extremely hazardous to your health. Therefore, you may use a low-temperature heat gun, but heat guns used in excess of 1100 degrees are prohibited, as are open-flame burning torches.

Click here to learn more about Lead Paint Removal Training and our 8 Hour RRP Lead Certification Course.

Step 2 In our Series: 6 Steps to Containing a Lead Contaminated Worksite

Step Two: Before the Work Begins, Containing the Area
If you are working on a home built prior to 1978, you will want to begin your bid process by testing the surfaces in the renovation area for lead paint or varnish. If you determine through an EPA-recognized Lead Testing Kit that your worksite contains lead, you will need to secure the regulated area prior to beginning any work activities. Here is a checklist of the materials you will need to properly secure the regulated area.


Materials You Will Need
• Heavy Plastic Sheeting
• Blue Painter Tape and/or Stapler
• Warning Signage which states: Warning Lead Poison Keep Out
• Warning/Barrier Tape
• Paperwork Holder

The procedures for containing the regulated space are similar in concept for both indoors and outdoors renovations. Remember, all companies involved in the renovation need to be an EPA Certified Firm and have an EPA Lead Certified Renovator on site during their renovation activities. EPA lead certification of one firm does not provide coverage for other firms subcontracting on the same project; each firm is responsible for its own activities and certifications.

Indoors Renovations:

• Remove all furniture and appliances possible prior to containment. Those items that cannot be removed should be encapsulated in heavy plastic or poly furniture covers.
• Close and seal all HVAC vents leading into and out of the worksite
• Turn off all HVAC systems during renovation whenever possible
• Seal all doors, windows and openings with heavy plastic and tape or staples
• Cover the floors with heavy plastic sheeting
• Place warning signage at all entrances to the worksite.
• Assign separate pathways and entrances to the home for residents and workers to enter and leave the site while working.

Outdoors Renovations:

• Seal all windows and doorways around the worksite
• Cover the ground and landscaping with heavy plastic
• Remove children’s playground equipment if possible, or cover with heavy plastic
• Mark-off work area with warning barrier tape

Be sure the residents understand the importance of respecting the barriers once work has begun. Curious homeowners may be tempted to sneak a peek at your progress, and in the process contaminate other areas of the residence. Once work has begun, homeowners wanting to check progress should be accompanied by one of your workers, someone who can help them to suit-up and decontaminate themselves before leaving the workspace. We will cover protective gear and clothing in Step 3 of our series, Gearing Up With Lead-Safe Protective Gear.

Six Steps To Lead Containment: A Lead Certified Contractor’s Guide to EPA RRP Worksite Containment: Step One

It’s a surprising statistic that lead paint was used in approximately 38 million homes prior to its banning in 1978. The EPA estimates that 24% of homes built between 1960 and 1978 contain lead paint, 69% of homes built between 1940-1960 and 87% of those built before 1940 contain lead paint. Lead paint is out there, and you need to know the RRP Rules and Regulations in order to maintain compliance with them. In this series of articles we will provide you with a step by step guide to proper containment procedures and materials to help you to ensure compliance with the EPA RRP Rules.

Remember, you must be EPA Certified prior to starting on a lead contaminated renovation project. One eight hour course will get you certified, it’s inexpensive and well worth the investment. Failure to comply may result in fines of up to $37,500.00 per day, per violation. If a repair or renovation will disturb more than six square feet of interior painted surfaces or 20 square feet of exterior painted surfaces, these rules apply to you.

As a contractor working on homes and childcare facilities built prior to 1978, you should be aware of the new EPA RRP Lead Safety regulations that place specific legal responsibilities on renovators, painters, plumbers, electricians and glaziers. Homeowners on the other hand are typically unaware of the rules until a lead certified renovator or a health related incident brings them to their attention…

Distributing The EPA Renovate Right Pamphlet
If you are working on a home or childcare facility built prior to 1978, Federal law requires that you provide the homeowners and residents with the EPA’s Renovate Right Brochure. This pamphlet is available and downloadable from the EPA’s website; it informs residents of the hazards of lead contamination, the basics of lead containment and provides recommendations for lead testing and the hiring of Lead Certified Renovation professionals.

Distributing this brochure can be a useful marketing tool for you as well. You can set yourself apart from the competition as an EPA Certified Firm and Renovator. Additionally, the brochure educates homeowners regarding the special equipment and containment materials that will be required and ultimately built into your proposal. The Renovate Right brochure can help you to pass through these additional operating costs; homeowners that understand the hazards of lead contamination also understand the extra expenses required to provide them with a safe living environment both during and following the renovation.

Once you have won the bid, there will be new materials you will need to invest in prior to beginning the project. In the next issue in this series, Step Two: Before the Work Begins, Containing the Area , we will provide a shopping list and breakdown the procedures required to contain the work area. The RRP Rules and recommendations that we review in this article are designed to protect both the workers and the occupants from the hazards of lead poisoning. The processes are not difficult or costly, in fact they are fairly straightforward, so make sure you get EPA Lead Certified prior to beginning any RRP regulated renovations, follow the RRP Rules, and get the lead out right.

The new EPA RRP Lead Safety Rule - Myth, Mania or Material Risk?

Many of our students enter the new EPA Lead Paint Certification classes skeptical of the real risks that might be involved in working on lead-based paint contaminated renovations.  After all, US regulations discontinued its sale after 1978. Students question whether the new regulations will merely hinder their ability to get the job done. 

While contamination levels have dropped since the 1960’s, the CDC estimates that approximately 250,000 U.S. children aged 1-5 years have blood lead levels greater than 10 micrograms of lead per deciliter of blood, the level at which CDC recommends public health actions be initiated.  The Ohio ABLES Registry reports that 14% of adults age 16-80 tested for elevated lead levels had levels greater than 10 micrograms of lead per deciliter of blood.  Elevated contamination levels were most likely to be reported for individuals in the age range of 40-64. It is assumed that this greater risk is due to the fact that these individuals are more likely to be working fulltime, thus increasing their risk of exposure.

Lead causes long term nervous system damage, stunted growth, delayed development, and emotional issues in children and adults.  It has been known to cause kidney damage and can affect most organ systems in the body. As a danger to adults, it can cause reproductive problems for both men and women. Lead paint is particularly treacherous because it tastes sweet, therefore encouraging children to put lead chips and toys with lead dust in their mouth.

One myth related to lead-based paint is that children must eat leaded paint chips to develop lead poisoning, when in fact the most common exposure to children occurs through ingestion of lead dust from normal hand-to-mouth contact when they swallow lead dust dislodged from deteriorated paint or leaded dust generated during contractor repair work, remodeling or paint surface preparation work.

Much like Asbestos and second hand smoke, lead dust is an insidious contaminant that is not easily eliminated from the body by normal processes.  Given that lead dust is portable and can easily contaminate ventilation systems, vehicles and worker’s clothing, the EPA’s guidelines for lead safety, containment and protective gear are meaningful and necessary.  To learn more about the guidelines and learn how to get the lead out right, click on the links to the EPA’s RRP website.  If you are interested in learning more about the curriculum and exam necessary for certification check out our website at www.leadpaintremovaltraining.com.  In my next post, I’ll go over the specifics of lead poisoning: its symptoms in children and adults as well as treatment options.